Motors

Choose between brushed, brushless, outrunner and robot joint motors for your power supply, load and control system.

DC AND BRUSHLESS MOTORS

Motor selection starts with the motion the mechanism must produce. A motor that fits the space still needs enough torque at the required speed, a suitable supply and a control method that fits the machine.

Our range includes brushed DC, brushless DC, outrunner and robot joint motors. Brushed motors use a simpler drive but have brushes that wear; brushless designs require electronic commutation. Outrunners have a rotating outer body, while the robot joint range is intended for joint motion. Check the individual model and its available data before choosing.

Compare these requirements before selecting a motor:

Working speed and torque, plus starting and peak loads
Supply voltage, current and controller compatibility
Available diameter, length, mounting and shaft space
Duty cycle, temperature and maintenance access

For low-speed output, a gearmotor may be a better starting point. Verify the gearbox limit and output conditions for the selected combination.

Model	Motor Ø (mm)	Motor length (mm)	Voltage (V)	Rated speed (rpm)	Rated torque (mN·m)	Rated power (W)	CAD
DC050	15.5	26.9	12 – 24	7000 – 10000	0.78 – 1.18	0.5 – 1.2	—
DC180	20.4	32.1	12 – 24	7200 – 12600	2.26 – 3.53	1.74 – 4.5	—
DC2238	22	38.2	12 – 24	3600 – 5388	3.43 – 4.9	1.3 – 2.75	—
DC370	24.4	30.8	12 – 24	3900 – 5550	1.96 – 2.94	0.86 – 1.6	—
DC395	27.8	46.5	12 – 24	3879 – 5359	9.32 – 13.73	3.79 – 7.73	—
DC528	32	29.1	12 – 24	3680 – 6000	4.31 – 7.85	1.75 – 4.6	—
DC555	36	57	12 – 24	2600 – 5300	15.49 – 23.93	4.11 – 12.9	—
DC775	45	66	12 – 24	2450 – 5233	34.32 – 56.29	8.5 – 30	—
DC997	54.5	85	12 – 24	4180 – 5400	114.54 – 166.61	48.8 – 86	—

Model	Motor Ø (mm)	Motor length (mm)	Voltage (V)	Rated speed (rpm)	Rated torque (mN·m)	Rated power (W)	Specification	CAD	3D CAD
BL16	16	36.5	12	8000 – 11000	2.45 – 2.65	2 – 3	—	—	—
BL22	22	67.4	12 – 24	4900 – 8300	11.96 – 17.55	6.3 – 15.5	—	—	—
BL28	27.7	37.5	12 – 24	5100 – 5300	7.65 – 8.73	4.12 – 4.64	—	—	—
BL32	32	29	18 – 36	5100 – 6200	7.06 – 12.75	3.56 – 8.4	—	—	—
BL36	36	57	12 – 24	3300 – 7937	14.71 – 43.15	5.8 – 35.9	—	—	—
BL42	42	59	12 – 24	3820 – 5269	46.88 – 77.67	19 – 41.5	—	—	—

Model	Motor Ø (mm)	Motor length (mm)	Voltage (V)	KV	Rated torque (mN·m)	Rated power (W)	Specification	CAD	3D CAD
MX22	28	26	12 – 24	360	32.36 – 44.13	15 – 45	—	—	—
MX28	36	30	12 – 24	150	0.05 – 0.08	6 – 22	—	—	—
MX33	42	32	12 – 24	125	0.05 – 0.12	8 – 30	—	—	—
MX42	52	34	24 – 48	150	0.28 – 0.56	74 – 256	—	—	—
MX53	62	37	24 – 48	100	0.5 – 1	100 – 380	—	—	—

Model	Voltage (V)	Ratio (:1)	Rated torque (mN·m)	Peak torque (mN·m)	Rated speed (rpm)	Net mass (kg)	Specification	CAD	3D CAD
SPC80	24	8	4000	12900	240	0.32	—	—	—
SPC100	24	8 – 20	—	—	66 – 210	0.65 – 0.67	—	—	—
SPC120	48	—	—	—	—	—	—	—	—

Motors

DC AND BRUSHLESS MOTORS

DC Motors

BLDC Motors

Outrunner BLDC Motors

Robot Joint Motors